Lab instructions
This lab will test your ability to configure HDLC back to back connection on a serial link between two Cisco ISR routers in Packet Tracer 8.0 . Practicing this labs will you to get ready for the CCNA certification exam simulation questions.
1. Use the connected laptops to find the DCE and DTE routers. You can connect to the routers using CLI.
2. Configure the routers with the following parameters :
- Clock : 250000
- HDLC link between the routers
- DCE router IP : 192.168.10.5/30
- DTE router IP : 192.168.10.6/30
3. Check IP connectivity between the two routers using the ping command.